Independently sterility & endotoxin tested
Current lot 145675
- Sterility result
- Complies
- Bacterial endotoxins
- <0.00500 EU/mL
Bacteriostatic Water 10ml - UK Manufactured (0.9% Benzyl Alcohol)
£8.95
You save
UK-manufactured bacteriostatic water formulated with USP Water for Injection (WFI)-grade water and 0.9% benzyl alcohol, supplied in a sealed 10ml borosilicate glass vial. Independent Eurofins sterility and bacterial endotoxin reports are available for current lot 145675. Fully batch traceable and supplied for laboratory reconstitution, analytical research and laboratory use only.
Independently sterility & endotoxin tested
Current lot 145675
- Sterility result
- Complies
- Bacterial endotoxins
- <0.00500 EU/mL
Product Overview
PhD Peptides Bacteriostatic Water is a UK-manufactured laboratory reconstitution solution formulated with USP Water for Injection (WFI)-grade water manufactured under ISO 9001 and ISO 13485-certified quality management systems.
USP WFI-grade water is produced to tightly controlled United States Pharmacopeia specifications for chemical purity, conductivity, Total Organic Carbon and bacterial endotoxins, providing a high-purity base for laboratory reconstitution and analytical workflows.
The finished solution contains 0.9% benzyl alcohol as a preservative and is supplied in a sealed 10ml borosilicate glass vial. Independent Eurofins sterility and bacterial endotoxin reports are available for the current lot, 145675, with batch identification for traceability.
Every vial is fitted with a bromobutyl rubber stopper and tamper-evident aluminium seal to help maintain product integrity throughout storage and laboratory handling.
Product Features
- Manufactured in the United Kingdom
- Formulated with USP Water for Injection (WFI)-grade water
- WFI-grade water manufactured under ISO 9001 and ISO 13485-certified quality management systems
- Contains 0.9% benzyl alcohol as a preservative
- Current lot independently tested for sterility: Complies
- Current lot independently tested for bacterial endotoxins: <0.00500 EU/mL
- Supplied in a 10ml borosilicate glass vial
- Bromobutyl rubber stopper
- Tamper-evident aluminium cap and seal
- Full batch and lot traceability
- Lot-specific Certificate of Analysis
- Suitable for laboratory reconstitution and analytical workflows
- Supplied strictly for laboratory research use
Independent Laboratory Reports
Two complementary Eurofins reports cover Bacteriostatic Water, lot 145675. The sterility result is Complies. The bacterial endotoxin result is <0.00500 EU/mL, below the report specification of <0.5 EU/mL.
Open the Certificate of Analysis tab to view both original reports, their test methods and sample references. Match the lot and batch details to your vial or packaging. These results relate to the samples tested and support laboratory research use.
For the wider laboratory context, our guide to laboratory water grades explains what to check in a water specification. View the original sterility and bacterial endotoxin reports for the published lot and match the identifiers to your vial.
Storage Instructions
- Store at 15°C to 25°C
- Store in a clean, dry location
- Protect from direct sunlight and excessive heat
- Keep the vial sealed until required
- Handle only under suitable laboratory conditions
Important Notice
This product is supplied strictly for laboratory research and analytical purposes only.
- Not for human or veterinary use
- Not intended for medical administration
- Not intended for food, cosmetic or household applications
- Not intended to diagnose, treat, cure or prevent any disease
- To be handled only by suitably qualified laboratory personnel
By purchasing this product, the buyer confirms that it will be used solely within a lawful laboratory research environment and in accordance with all applicable laws, regulations and laboratory procedures.
| Brand | PhD Peptides |
|---|---|
| Product Type | Non-Pyrogenic Mixing Water |
| Format | Sterile Solution |
| Quantity | 10ml |
| Composition | Sterile WFI Water with 0.9% Benzyl Alcohol |
| pH | 6.0 |
| Storage | Store at 15°C to 25°C. Protect from light. |
| Intended Use | Laboratory Research Only |
| Appearance | Clear Colourless Solution |
| Packaging | Type 1 Borosilicate Glass Vial |
| Closure Type | Bromobutyl Rubber Stopper |
Independently Tested, Fully Traceable
PhD Peptides Bacteriostatic Water is supported by independent Eurofins sterility and bacterial endotoxin testing. View the original reports below and match their lot number to your vial or packaging.
Currently Shipping
| Product Name | Bacteriostatic Water (0.9% Benzyl Alcohol) |
|---|---|
| Lot Number | 145675 |
| Batch Numbers | TA0110, UB0220, VC0330 |
| Manufacture Date | 01 April 2026 |
| Expiry Date | 31 July 2028 |
| Packaging | Type 1 Borosilicate Glass Vial |
| Storage Conditions | Store at 15°C to 25°C. Protect from light. |
| Intended Use | Buffer for dissolution, suspension and dilution of samples. Not for medical or veterinary use. |
Sterility Testing
Complies
Independent sterility testing complied with the requirements applied in the report.
| Sterility result | Complies |
|---|---|
| Lot number | 145675 |
| Eurofins sample | EY25AA0779-1 |
| Analytical report | ABT99315 |
| Analysis method | EP 2.6.1 / USP <71> / JP 4.06 |
| Analysis dates | 18 April to 2 May 2026 |
| Report release date | 6 May 2026 |
Bacterial Endotoxin Testing
<0.00500 EU/mL
The measured result is below the report specification of <0.5 EU/mL.
| Bacterial endotoxin | <0.00500 EU/mL |
|---|---|
| Report specification | <0.5 EU/mL |
| Lot number | 145675 |
| Eurofins sample | EY26AA0607-1 |
| Analytical report | ABZ14609 |
| Analysis method | Kinetic method; Ph. Eur. 2.6.14 / USP <85> / JP 4.01 |
| Analysis date | 13 October 2026 |
| Report signed | 19 October 2026 |
Both reports identify Bacteriostatic Water, lot 145675. Results apply to the samples and tests described in each report. Supplied strictly for laboratory research and analytical use, not for human or veterinary use.
Additional Product Specifications
The following manufacturer-supplied specifications are separate from the independent Eurofins results above.
| Test | Result | Status |
|---|---|---|
| Conductivity | 0.059 µS/cm | Conforms |
| pH | 6.0 | Conforms |
| Clarity / Turbidity | < 1 FTU | Conforms |
| Total Organic Carbon | < 50 ppb | Conforms |
| Fill Volume Tolerance | +/-5% | Conforms |
Fast Dispatch
We aim to despatch all orders quickly, securely, and discreetly from our UK and Ireland distribution facilities. Orders placed before 3pm are typically dispatched the same business day on business days. Orders placed after this time may be dispatched the following working day.
Free UK DeliveryDelivery options
Free delivery to United Kingdom when spending over £20See delivery options at checkout.Estimated Delivery Times
• United Kingdom: 1 business day
• Europe: 5 to 7 business days (UPS Express 1-2 business days and UPS Standard 3-4 business days available at extra cost)
• International: Delivery times vary depending on destination and customs processing, typically 5 to 10 business days
Order Tracking
Tracking information is provided for eligible shipments once your order has been dispatched.
Payment Information
We currently accept Visa, Mastercard and American Express credit or debit cards. Plus, secure Open Banking payments in the UK and EU (SEPA), and direct bank transfers from non-SEPA European Countries and Worldwide.
176 reviews for Bacteriostatic Water 10ml - UK Manufactured (0.9% Benzyl Alcohol)
Bacteriostatic Water 10ml - UK Manufactured (0.9% Benzyl Alcohol)
Related products
Bacteriostatic Water 20ml - UK Manufactured (0.9% Benzyl Alcohol)
UK-manufactured bacteriostatic water formulated with USP Water for Injection (WFI)-grade water and 0.9% benzyl alcohol, supplied in a sealed 20ml borosilicate glass vial. Independent Eurofins sterility and bacterial endotoxin reports are available for current lot 145675. Fully batch traceable and supplied for laboratory reconstitution, analytical research and laboratory use only.
Bacteriostatic Water 30ml - UK Manufactured (0.9% Benzyl Alcohol)
UK-manufactured bacteriostatic water formulated with USP Water for Injection (WFI)-grade water and 0.9% benzyl alcohol, supplied in a sealed 30ml borosilicate glass vial. Independent Eurofins sterility and bacterial endotoxin reports are available for current lot 145675. Fully batch traceable and supplied for laboratory reconstitution, analytical research and laboratory use only.
I was traveling to England and forgot my BAC. After talking to a representative, they were able to overnight the product to my hotel. Great quality! I highly recommend this product and the company.
Does exactly what it’s supposed to - a clear, sterile solution ideal for peptide reconstitution.Arrived sealed in a mylar pouch, no leaks, and the vial is labelled clearly with batch and expiry dates.Good volume for the price, no bells and whistles here - just reliable, properly prepared bac water that does the job!
Clean product and fast & safe delivery from UK to Germany.
Super fast delivery, constant updates and product was packed to perfection.
The product itself was fantastic quality 10/10 in every aspect, great service will definitely use again.
Excellent product
Easy to order, quick delivery, great packaging - will order again
Perfect like always
Very good Company would highly recommend .
Fast delivery and haven’t notice any problems.
Easy ordering , Fast delivery ,packaged well ,have not tried the product yet but totally confident with the vendor and specifically trusted them over many other suppliers following research and assurances of how the bacs water is tested to make sure its good quility